Bolt Making Plant

Bolt Making Plant

Automatic Double Stroke Header Machine

These cold heading machines are fully automatic and easy to operate with little training, fitted with Solid Die to produce blank for Bolts, Screws, Rivets and other similar components. Cut off and knock out mechanism have safely devices that will stop any major accident if any abnormal function occurs in machines.

A positive knock out provision had been made on the 1st and 2nd punches to eliminate the possibility of parts sticking to these punches during the operations. The maximum parts of the machines are ground and all the Cames and Rollers from H.C.H.C. (Hardened & Ground).

On some extra charges machines will be equipped with Pneumatic Clutch & Automatic Centralized Lubrications systems which provides sufficient quantity lubricating to all bearing surface.

Item Code No.	Length of Bolt	Dia. of Bolt	Production Per Minute	Motor H.P. & R.P.M.
GI-HM-2	2" (12 mm - 50 mm)	1/4" (3 mm - 6 mm)	90 - 95 Pcs.	5 x 960
ABM-FM- 2.5	2-1/2" (20 mm - 65 mm)	5/16" (6 mm - 8 mm)	80 - 85 Pcs.	7.5 x 960
ABM-FM-3	3" (20 mm - 75 mm)	3/8" (6 mm - 10 mm)	70 - 75 Pcs.	10 x 960
ABM-FM-4	4" (25 mm - 100 mm)	1/2" (8 mm - 12 mm)	60 - 65 Pcs.	20 x 960
ABM-FM-5	5" (35 mm - 125 mm)	5/8" (10 mm - 16 mm)	50 - 55 Pcs.	30 x 960
ABM-FM-6	6" (50 mm - 150 mm)	3/4" (12 mm - 20 mm)	35 - 40 Pcs.	40 x 960

Bolt Head Trimming and Shank Reducing Machines

(Automatic, High Speed)

ABM Tools Automatic Bolt head Trimmers are extra exclusive in their transport system. One of the Special features is that bolts with extreme short shank length can be transported without any difficulty. It makes ABM TOOLS Trimmer the fastest in the market.

The simplicity of the tooling increases the efficiency considerably and cuts down on set up time.

The machine is well known GROWTH INDUSTRIES quality which stands for excellent workmanship and superior design.

ESSENTIAL FEATURES

Machine design is very simple. All working parts & gears are enclosed as possible. Speed can be changed by motor pulley. Automatic feed with efficient drum type hopper of high capacity.

Bolts are transferred by finger from feed rails to trimming die. All adjustments are easy operated and simple. Vibrator Hopper for odd components (optional)

• Fastest machine on the Market
• Sophisticated Transport System
• Rugged design
• One operator for upto 4 machines
• Fine Stroke adjustment

Item Code No.	Length of Bolt	Dia. of Bolt	Production Per Minute	Motor H.P. & R.P.M.
GI-TM-2	2" (12 mm - 50 mm)	1/4" (3 mm - 6 mm)	90 - 95 Pcs.	3 x 1400
GI-TM-2.5	2-1/2" (20 mm - 65 mm)	5/16" (6 mm - 8 mm)	80 - 85 Pcs.	5 x 1400
GI-TM-3	3" (20 mm - 75 mm)	3/8" (6 mm - 10 mm)	70 - 75 Pcs.	7.5 x 1400
GI-TM-4	4" (25 mm - 100 mm)	1/2" (8 mm - 12 mm)	60 - 65 Pcs.	10 x 1400
GI-TM-5	5" (35 mm - 125 mm)	5/8" (10 mm - 16 mm)	50 - 55 Pcs.	15 x 1400
GI-TM-6	6" (50 mm - 150 mm)	3/4" (12 mm - 20 mm)	35 - 40 Pcs.	25 x 1400

Thread Rolling Machines (Automatic, High Speed)

Features

• These machines are designed for mass production and lowest maintenance cost.
• Suitable for threading bolts, automobile parts and other similar components.
• Two flats dies used in these machines, which easily fitted and adjusted.

Item Code No.	Length of Bolt	Dia. of Bolt	Production Per Minute	Motor H.P. & R.P.M.
GI-TM-2	2" (12 mm - 50 mm)	1/4" (3 mm - 6 mm)	90 - 95 Pcs.	3 x 1400
GI-TM-2.5	2-1/2" (20 mm - 65 mm)	5/16" (6 mm - 8 mm)	80 - 85 Pcs.	5 x 1400
GI-TM-3	3" (20 mm - 75 mm)	3/8" (6 mm - 10 mm)	70 - 75 Pcs.	7.5 x 1400
GI-TM-4	4" (25 mm - 100 mm)	1/2" (8 mm - 12 mm)	60 - 65 Pcs.	10 x 1400
GI-TM-5	5" (35 mm - 125 mm)	5/8" (10 mm - 16 mm)	50 - 55 Pcs.	15 x 1400
GI-TM-6	6" (50 mm - 150 mm)	3/4" (12 mm - 20 mm)	35 - 40 Pcs.	25 x 1400